Bird feeders: instructions, photos and original ideas
To make a bird feeder, you need to have some simple things and tools.
The feeder can be done together with the children, but keep in mind that you need to follow every step, since during the construction process, sharp things are used. scissors, knives, screwdrivers and even, at times, saw.
There are many options for feeders. from plywood, a plastic bottle, a can or cardboard.
Here are the most interesting, popular and original ideas for creating a feeder:
Handling feeder: toilet paper bushings
– 1 toilet paper sleeve
– durable thread or fishing line
– knife (dull or plastic).
1. Connect the two branches or sticks together using hot glue or rope. You can skip this point if you make 4 holes in the sleeve (see below).
2. Make holes in the toilet paper sleeve so that two branches or sticks can be pushed into them. It is better to make 2 holes: a little higher and 2 a little lower (see image). This item is optional. the sleeve can be worn differently.
3. Put peanut butter in a small bowl and use a plastic knife to apply butter to the surface of the cardboard toilet paper sleeve.
4. Sprinkle the food over the hub coated with peanut butter.
5. Repeat steps 3 and 4 for 4 more bushings.
6. Tie a strong thread to the connected branches so that the structure can be hung.
7. Hang all cardboard sleeves on a twig structure, and then hang everything on a tree.
Plastic bottle feeder. Option 1.
– any plastic bottle
– tape, thread or fishing line
– awl or drill (for making holes in the bottle and plastic cap)
– stationery knife or simple (if necessary)
– deep plastic plate.
1. Prepare a plastic bottle. Remove the label from it, wash and dry well.
2. Make a hole in the middle of the lid and plastic plate.
3. Attach the cover to the plate with the bolt and nut.
4. Make a hole in the bottom of the bottle (at the bottom).
5. Make several holes on the side (4-5), at the neck of the bottle, so that the feed can spill out when you turn the bottle over. Holes can be made with a clerical knife if the bottle is not too tight.
6. Take the tape, fold it in half, and tie the ends into a knot. Pass the tape through the hole in the bottom of the bottle.
Now you can pour food into the bottle, screw on the lid and turn it over. The tape will allow you to hang the feeder on a branch.
Bird feeder from a plastic bottle. Option 2
– durable thread or fishing line
– screwdriver or nail
– knife (simple or clerical).
1. Remove the cap from the bottle and the cap from the container.
2. Put the bottle cap on the container cap (in the center) and circle with a pen, felt-tip pen or pencil.
3. Using a stationery knife, cut a hole in the lid from the container. The hole can be made slightly smaller than the diameter of the bottle cap.
4. Make one hole at the edges of the lid from the container.
5. Make a hole in the center of the bottle cap. The hole should be large enough so that bird feed spills out through it.
6. Put the cap on the bottle and then insert the bottle into the opening of the cap from the container.
7. Tie a strong thread to the bottle and put the cap on the container.
Now you can pour food into the bottle or pour water and hang the feeder on a tree.
How to make a feeder out of the box (photo instruction)
Original polymer clay feeder
– thick wire or piece of aluminum
– a baking bowl or any other dishes that can be put in the oven
– a small piece of fabric.
1. First, roll the clay on a flat surface so that its thickness is about 6 mm.
2. Carefully place the rolled clay inside the baking bowl. Trim the excess parts so that the clay lies flat. Make 3 large holes in the clay for the rope.
3. Place the clay bowl in the oven. Carefully read the instructions for clay to know how long it takes clay to solidify in the oven.
4. When the clay has hardened, carefully remove it from the bowl, tie three pieces of rope to it. tie a knot at one end of each rope and insert the other end into the clay plate hole.
5. Tie all ends of the rope and secure them with wire.
6. It is advisable to lay a small piece of cloth inside the dish so that the birds do not accidentally glue clay with the feed.
Original do-it-yourself pumpkin feeder
– wooden crossbeams (even branches are possible)
1. From the pumpkin you need to cut off the top.
2. Using a knife or screwdriver, make 4 holes in the pumpkin to insert branches or wooden crossbars into them. Make 2 opposite holes at the same height and two other opposite holes just below. so you have one branch will be slightly higher than the other.
3. Take a thin wire and wrap it around each end of the branches so that the feeder can be hung on a tree. Connect all ends of the wire so that the feeder can hang evenly. Twist them in a hook.
The original idea of do-it-yourself bird feeders
Such a feeder is suitable for subzero temperatures.
– big plastic bottle
– small plastic bottle or small plastic container
– berries (optional)
1. Cut the bottom of a large and small plastic bottle. First you can make a hole with a knife and then cut with scissors. You will get the base of the feeder.
2. In the cut bottom of a large bottle, put in a circle the branches of spruce, berries and seeds.
3. Place the bottom of a small bottle or small plastic container in the center of the base.
4. Pour earth, sand, or pebbles into a small container.
5. Tie strong yarns or fishing line to the feeder so that it can be hung.
6. If you put the feeder overnight in the freezer, and then remove and remove the plastic parts, you get an ice feeder.
How to make a feeder with your own hands using a bottle
– a small glass or plastic bottle (preferably with a cap)
– a small saucer or the bottom of a plastic bottle
– saw (if necessary)
– screw half ring (hook).
1. Using screws, connect two small pieces of plywood. In this example, the plywood sizes are 11 x 15 cm and 31 x 15 cm.
2. Using a bottle, which you later attach to the stand, mark the places where you will need to attach two pieces of wire. one at the neck, the other at the bottom of the bottle.
3. The neck of the bottle should be approximately 3-4 cm above the base.
4. Drill holes for the wire, insert your wire through the bottom, grasp the bottle with it and fasten it on the back of the plywood (you can twist the wire or fasten with a stapler).
5. Fill the bottle with seeds, tighten the lid so as not to spill the seeds, turn over and insert the bottle between the wires, and under it place a saucer and remove the lid.
6. Screw a half ring screw to the top of the plywood to hang the feeder.
Original DIY bird feeder
– tin can (preferably with a lid)
– sisal cable (sisal rope) or thick rope
– a piece of thin plywood, twig or any small metal part
1. If you have a jar with a lid, you need to bend the lid in half.
2. Take a small branch, a piece of plywood, or another small part that birds can sit on and glue it to the jar.
3. Insert the bent cover as shown in the image (slightly inside the can and above the metal part), and fix it with glue.
4. Take a thick rope or rope about 80 cm long, and start wrapping the jar so that at the beginning and at the end the long ends of this rope (30 cm) remain. Use glue to secure the rope to the jar.
5. Cut the rope, tie the ends to a knot and secure with glue.
Interesting idea bird feeders
– 3/4 cup bird food
– 1 packet of gelatin
– twine or strong thread
– cookie baking dish
– baking paper.
1. Mix gelatin with water (1/4 cup) and bring to a boil, stirring. Make the gelatin dissolve completely.
2. Remove from heat and let cool.
3. Add 3/4 cup of bird food. You can add more if fits.
4. Put cookie cutters on baking paper and fill them with the resulting feed mixture.
5. Cut a piece of thread and tie its ends into a knot. Partially thread the mixture.
6. Leave the mixture to dry overnight, periodically trying to turn over when there is time.
7. Remove the molds and hang the feed on the tree.
How to make a bird feeder with your own hands using tin cans
– 3 cans of paint or canned food
– piece of twig or wooden stick
– paints (if desired).
You can paint the cans, but you can leave it as it is.
1. Glue a piece of the branch to the jar so that the birds can land and eat.
2. Wrap a strong thread or tape around the can and tie the ends into a knot. You can fix the tape with glue so that it sticks better to the jar.
3. Fill the cans with food and you’re done!
How to make a bird feeder out of a plastic bottle
– plastic bottle (1.5 l or 5 l) or canister
– sharp scissors or clerical knife
1. Cut a large side hole in the bottle, preferably a through hole. It is better to draw a marker with a marker where the hole will be.
2. To make it more convenient for the birds to stick, it is better to glue the edges of the bottle with tape.
3. Pour sand into the bottom of the feeder so that it does not sway violently.
4. Tie a rope to hang the feeder.
You can decorate the bottle to taste.
Here are some more similar feeders:
How to make a bird feeder (video)
DIY bunker feeder (video)
Bird feeders (photo)
Original bird feeders (photo)
Crescent-shaped feeder with transparent walls